Aggregate Hoppers





SPECIFICATION - ABD111 Aggregate Hoppers

TRAILER WEIGHT: 10,200 lbs. +/- 3%
CAPACITY: 24 yards per set / with 10" 27 yards / 16” risers 33 yards
GROSS PAYLOAD CAPACITY: 56,000 lbs. / 28 ton per set
MATERIAL: High strength steel 45,000-psi minimum yield
DISCHARGE: (1) air operated clamshell gate, opening 48 ½" x 63 ¾"
AIR CYLINDERS: (2) 6" diameter with (1) quick release valve on each cylinder
CONTROLS: Manual air/electric valve with cab control, valve is mounted on the roadside to the rear of the gate in a protected area
LIGHTS AND WIRING: 12 volt DOT system with ATA 7-way receptacle, LED lights and sealed harness
BANG BOARDS: 16" riser on the sides and 18" high steel on the ends
PUSH BAR: 18" long steel assembly welded onto the rear of the pull trailer only
SHED PLATES: Aluminum panel on the front and rear truss diagonals
SLOPE SHEETS: 16-gauge high strength steel
GATE ASSEMBLY: High strength steel with spreader chains
PAINT: White Polyurethane enamel
LENGTH: 19’-10 5/16" overall
WIDTH: 96" overall
SUSPENSION: Hutch H9700 single axle with single leaf composite spring on 38" spring centers, adjustable radius rod on one side and solid radius rod on the other side, 20,000 lbs. capacity
AXLES: 5" diameter axles, 22,500 lbs. capacity, 71.5" track, automatic slack adjusters and oil bath seals
BRAKE SYSTEM: FMVSS 121 with the anti-skid feature
DRUMS: 16 ½" x 7" cast steel outboard mounted
HUBS: Lightweight steel 10 stud on 11.25" BHC for the hub pilot disc wheel
WHEELS: (12) 22.5 x 8.25 PPW steel disc, hub pilot
TIRES: (12) 11R 22.5 highway tread 14 ply
SUPPORTS: Removable, slip-in non-adjustable stiff leg
COUPLER: One piece forged high tensile alloy 2" SAE kingpin, welded to the high strength steel coupler plate
FENDERS: Black high impact fenders at the rear and over the turntable axle
TURNTABLE: Full turn ball bearings
HITCH: Premier #270
DRAWBAR: ACE/Fruehauf type with bushings and ACE/Fruehauf type cast hinge assembly
  • Measurements, clearance and dimensions are approximate and describe a standard trailer
  • Drawing is not to scale.
  • Weights, if shown, are typical and will vary.
  • All specifications, illustrations and information contained herein are based on the latest information available at the time of publication. American Carrier Equipment reserves the right to make any changes without notice or obligation.

WARRANTY

We warrant this product for one year from the date of delivery to be free from defect in material and workmanship; also that it will perform its intended job satisfactorily when under normal use and service. Our responsibility is limited to making good at our facility by repair or replacement of any part which upon our examination is found to be defective in its construction or application. All freight charges are for our customers account. All vendor parts carry their own warranty.

American Carrier Equipment Bottom Dump Trailer For Sale End Dump Trailers End Dump Trailers For Sale