Our experience and expertise is unsurpassed in the trailer industry. Allow the ACE team to customize a trailer that will truly exceed all of your expectations.

Solid Waste Transfer Steel Moving Floor Trailer

Steel Moving Floor Trailer

SPECIFICATIONS: WFT452 LIGHTWEIGHT TRANSFER TRAILER

LENGTH: 45’-0"
WIDTH: 102" overall
HEIGHT: 13’-4" overall
WEIGHT: 17,200 lbs. +/- 3%
KINGPIN: 36"
COUPLER SECTION: Steel fabricated assembly with steel approach plate and steel side plates
SUSPENSION: Hutch H9700 weld-on undermount with 1 ¾" seats
SPRINGS: 3-leaf steel
AXLES: (2) 5" dia.22,500 lbs. capacity, 77.5" track
BRAKES: 16.5" x 7" S-cam, 20,000 lbs. capacity
HUBS: Cast steel with 10 studs on 11.25" BHC for hub pilot system
DRUMS: 16.5" x 7" outboard Centrifuse
WHEELS: (8) 22.5 x 8.25 aluminum disc, machine finish, hub pilot
TIRES: (8) 11R22.5 Highway tread 14 ply
BRAKE SYSTEM: FMVSS 121 with anti-skid brakes
BACK-UP ALARM: Included
SUPPORT LEGS: 2-speed box, 120,000 lbs. static capacity with a 13.5" minimum ground clearance
CROSSMEMBERS: Aluminum with end clips on 14.5" centers in the bay area and 12" centers in the front and rear subframe areas
BUMPER: Included in the rear frame
LIGHT BAR: .190" aluminum pan for the tail lights
FRONTWALL: Cropped corner design
SIDEWALL: .125" aluminum sidewall sheet riveted to the posts and rails with 3/16" stem and collar type fasteners
SIDEWALL POSTS: 1.5" deep 6061-T6 aluminum extrusion hat section
LINER: None
DIVIDER: None
UPPER RAIL: Aluminum self-cleaning shape, one piece, 6061-T6 extrusion
LOWER RAIL: Aluminum, one piece, 6061-T6 extrusion
TOP REAR HEADER: Steel tube 4" x 4"
REAR SILL: Fabricated steel floor sill
REAR DOORS: ¾" plymetal doors, galvanized inside panel, prepainted white exterior panel, double lock rods and 5-hinges per door, each door is reinforced with (2) vertical aluminum posts
WINDOW: (1) opening covered with expanded metal on the roadside of the front wall
REGISTRATION HOLDER: Mounted onto the front wall on the roadside
LIGHTS AND WIRING: FMVSS 108 system with LED (4) tail lights, triple I.D. lights, license light, (5) markers on each side of the top rail and the bottom rail, mid-turn signal and a sealed harness system for long life and trouble free connections
CONNECTIONS: Air and electrical connections centered on the front wall in the front crossmember
MOVING FLOOR: Moving floor for transfer station service, includes bearings on each crossmember and 1" hydraulic lines for pressure and return
LIDS: Optional
CROSSMEMBER: (1) steel tube section mounted in the middle and pinned at both ends
LID LIFTER: Optional
PAINT: white polyurethane enamel
SPLASH GUARDS: White anti-sail
  • Measurements, clearance and dimensions are approximate and describe a standard trailer
  • Drawing is not to scale.
  • Weights, if shown, are typical and will vary.
  • All specifications, illustrations and information contained herein are based on the latest information available at the time of publication. American Carrier Equipment reserves the right to make any changes without notice or obligation.

WARRANTY

We warrant this product for one year from the date of delivery to be free from defect in material and workmanship; also that it will perform its intended job satisfactorily when under normal use and service. Our responsibility is limited to making good at our facility by repair or replacement of any part which upon our examination is found to be defective in its construction or application. All freight charges are for our customers account. All vendor parts carry their own warranty.

American Carrier Equipment Bottom Dump Trailer For Sale End Dump Trailers End Dump Trailers For Sale