Our experience and expertise is unsurpassed in the trailer industry. Allow the ACE team to customize a trailer that will truly exceed all of your expectations.
Solid Waste Transfer Trailer/Moving Floor

Solid Waste Transfer Trailer/
Moving Floor

SPECIFICATIONS

LENGTH 48’-0"
WIDTH 102" overall
HEIGHT 13’-4" overall
WEIGHT 15,550 lbs. +/- 3%
KINGPIN 48"
COUPLER SECTION: Aluminum fabricated assembly with aluminum approach plate and aluminum side plates
SUSPENSION Hutch H9700 bolt-on undermount with 1 ¾" seats
SPRINGS 3-leaf steel
AXLES (2) 5" dia.22,500 lbs. capacity, 77.5" track
BRAKES 16.5" x 7" S-cam, 20,000 lbs. capacity
HUBS Cast steel with 10 studs on 11.25" BHC for hub pilot system
DRUMS 16.5" x 7" outboard Centrifuse
WHEELS (8) 22.5 x 8.25 aluminum disc, machine finish, hub pilot
TIRES (8) 11R22.5 Highway tread 14 ply
BRAKE SYSTEM FMVSS 121 with anti-skid brakes
BACK-UP ALARM Included
SUPPORT LEGS: 2-speed box, 120,000 lbs. static capacity with a 13.5" minimum ground clearance
CROSSMEMBERS: Aluminum with end clips on 14.5" centers in the bay area and 12" centers in the front and rear subframe areas
BUMPER Included in the rear frame
LIGHT BAR Steel pan for the tail lights
FRONTWALL Cropped corner design
SIDEWALL 18 gauge T304-2B stainless steel sidewall sheet riveted to the posts and rails with 3/16" stem and collar type fasteners
SIDEWALL POSTS 1.5" deep 6061-T6 aluminum extrusion hat section
UPPER RAIL Aluminum self-cleaning shape, one piece, 6061-T6 extrusion 
LOWER RAIL Aluminum, one piece, 6061-T6 extrusion
TOP REAR HEADER Steel tube 4" x 4"
REAR SILL Fabricated steel floor sill
REAR DOORS: ¾" plymetal doors, galvanized inside panel, prepainted white exterior panel, double lock rods and 5-hinges per door, each door is reinforced with (2) vertical aluminum posts
WINDOW (1) opening covered with expanded metal on the roadside of the front wall
REGISTRATION HOLDER Mounted onto the front wall on the roadside
LIGHTS AND WIRING: FMVSS 108 system with LED (4) tail lights, triple I.D. lights, license light, (5) markers on each side of the top rail and the bottom rail, mid-turn signal and a sealed harness system for long life and trouble free connections
CONNECTIONS: Air and electrical connections centered on the front wall in the front crossmember
MOVING FLOOR: Moving floor for transfer station service, includes bearings on each crossmember and 1" hydraulic lines for pressure and return
LIDS Optional
UPPER CROSSMEMBER (1) steel tube section mounted in the middle and pinned at both ends
LID LIFTER Optional
PAINT White polyurethane enamel
SPLASH GUARDS White anti-sail
American Carrier Equipment Bottom Dump Trailer For Sale End Dump Trailers End Dump Trailers For Sale